Outer Bay - Wolinsky/McClellan

INNER #1

Depth @ 102' lake level: 22'
Coordinates: 44° 37.0109' N, 73° 16.4379' W

Recommended max: 3,000 lbs

Last Inspected: 8/3/19

All metal hardware listed below is galvanized unless otherwise noted. Hardware with no "[measurement] remaining" information had no measurable wear.

 GREEN: Good condition.

 YELLOW: Fair condition.

 RED: Replace immediately.

Mooring Components:

  • 5/8" 3-strand pendant (splits into a bridle) w/ galvanized thimble at spar - THIMBLE WORN THROUGH

  • 6' aluminum spar buoy w/ teflon washers on lower pin

  • 5/8" eye-eye stainless swivel

  • 3/4" nylon rope w/ float, 18' length, ring hitch top, thimble bottom

  • 5/8" shackle

  • 1/2" chain, 17' length

  • 5/8" shackle

  • 5x5x1' block (~2,100 lbs in-water weight) w/ 1" galvanized bail - 15/16" remaining

Inspection — 8/3/19

Found the pendant thimble has worn completely through to the rope. The pendant rope & sides of the thimble are still intact for now, but recommend replacing the pendant ASAP. For the new pendant, recommend using a stainless thimble in the new pendant (spar buoy end) to prevent galvanic corrosion with the stainless spar buoy pin - using a stainless thimble on the stainless spar pin will last much longer.

Found a non-stainless steel cotter pin had been used for one side of the spar buoy top pin. Removed the improper cotter pin & replaced it with a stainless steel pin.

Other than the pendant, this mooring is in very good shape.

Inspection — 5/22/15

CALL US

Tel: 802-355-3148

EMAIL US
SHOP HOURS

Appointment available by request.

25 YEARS EXPERIENCE ON LAKE CHAMPLAIN

We know Lake Champlain.

  • Facebook Social Icon
  • YouTube Social  Icon
OUR SERVICES
VISIT US (please call first)
  • Boat & dock moorings

  • Boat salvage & towing

  • Underwater inspection with video

  • Search & recovery

  • Welding steel & aluminum

Red Cap Marine & Salvage, LLC

14 Melcher Pl.

South Hero, VT 05486

© 2019 Red Cap Marine, LLC. All rights reserved.